![]() ![]() It does ok with 100 grain but 125 and 150 grainers really bring out the best using this powder. In the 327 Federal mag 5744 Powder really shines with the heavy bullets. There are many reduced load possibilities with Accurate 5744 Powder and other powders. Due to its ability to utilize 38 caliber handgun bullets flexibility is one of its virtues. It has been around for over 100 years and is still being manufactured to an extent. Caliber: 35 RemingtonĪnother old timer cartridge is the 35 Remington. Shown are 7.62 X 54 Russian cases and dies. The 7.62 X 54 Russian is one of the many rounds that Accurate 5744 Powder works in. Like most military rifles from that period it responds to reduced loads well and is flexible to the handloader. The 7.62 X 54 Russian has been around since 1891 and still sees some limited service making it the longest serving military rifle. The Krag responds well to reduced loads and with the flexibility of 5744 it is a natural in this gun. The Krag action only has one locking lug so warm loads should be avoided. The 30-40 Krag Rifle was the US military rifle from 1893 to 1903 when the 30-03 replaced it. ![]() I have found that accuracy is good at those speeds. With the high sectional density of a 220 grain it would penetrate even at low velocities. A 220 grain bullet at 1000 FPS will be deadly at longer ranges up to a couple hundred yards with the only drawback would be drop. If you want a subsonic load in the 30-06 this might be the powder to use. That is one reason why I like 5744 so much. One thing I found that even with 13 grains velocities are consistent in the 30-06 case even though there is a lot of airspace. This is just a sample of the loads that can be used with 5744 powder. The 30-06 is the most flexible rifle round and I have developed many light and cast bullet loads. There are a handful of powders that are very flexible for many uses and the Accurate 5744 Powder is definitely one of them. I have tried in in the 38-55 and 45-70 with good results in both. In spite of the airspace the load was consistent using 45 grains. A friend of mine used it to shoot a 1 ton buffalo and one shot did it very effectively. The 45-120 shoots a 520-grain slug at 1600 FPS which will take down any animal you are likely to encounter. Velocities approximate the original loads which is what I desire with these antiques. I have found that 5744 powder works well in those guns with light loads. Most of the bolt action rifles have only one locking lug which is generally the bolt handle. While old guns are well made weapons for their day they are not designed for today’s modern high pressure loads. The 5744 is safe enough for this purpose. ![]() Accurate 5744 Powder Grains : image With the old guns such as the 11×60 Mauser rifle, it is important to keep the pressures low in order to be safe with them. It, like the older 5744 and meters well in my powder measure which is a plus. One challenge I wanted to try was to get a 220 grain Sierra BT HP out at around 1050 FPS in other words a subsonic load that is both consistent and accurate. With that thought in mind I decided to try reduced loads in such cartridges as the 30-06 and 30-40. Anyway, he sent me some to see for myself. The original is so good I was curious as to how it could be made better. When Keith Anderson who works in the lab at Accurate Arms told me that they were coming out with an improved version, he got my attention.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |